[WT-support] Microkeyer II DVK with WT not working

[W2LE]

I found that adding the MK-II to a comport got it working.  I didn't 
find any delays in limited testing, I'll see how it does in the contest.

I did have lots of trouble with CW delays using the MK-II with Writelog 
a few years ago, but that seems to be working better now.

Thanks

Paul  W2LE

On 10/19/2011 13:49, Bob Wilson, N6TV wrote:
> On Wed, Oct 19, 2011 at 8:58 AM, W2LE <w2le at yahoo.com 
> <mailto:w2le at yahoo.com>> wrote:
>
>     When I press F4 or F2 I only get a message "Message at 100% not
>     available" and nothing plays.
>
>     What am I missing?
>
>
> When you use the microHAM device as a sound card rather than as an 
> external DVK, i.e. by specifying:
>
> Voice Keyer:
>   Enable Sound card:  USB Voice Codec
>
> in the Win-Test Interfaces Configuration screen, you have to program 
> the messages using Win-Test (e.g., Shift-F1), not the microHAM 
> software.  This is actually the best way to use the microHAM voice 
> keyers right now, because the other methods (e.g. microHAM control 
> protocol) causes really bad 1-2 second message delays.  The microHAM 
> folks say Win-Test is the problem, and the Win-Test folks say microHAM 
> firmware is the problem, so in the mean time we have to work around 
> these issues ourselves.
>
> 73,
> Bob, N6TV
>
>
> _______________________________________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20111020/ca223d35/attachment.html>