[WT-support] Grabbing RTTY calls with Insert key

[Øyvind Ekhall]

Hi Larry,

I will check this and see if this is the reason why it doesent work

Thanks to all for the support on this issue
I will report back when i have tested


73 de
Olaf




2011/11/11 Laurent HAAS - F6FVY <f6fvy at free.fr>

> Hi again
>
> Le 11/11/2011 21:19, Laurent HAAS - F6FVY a écrit :
>
>  and sends the INSERT message programmed
>>
>> in the SO2R Scenario ("$R2R2 $INSERT $R1R2" - for primary radio by
>> default).
>>
>
> Maybe it is the reason why it doesn't work for you ?
>
> The "grab" function is not triggered by the key itself, but when the
> standard INSERT message (set in the Options / RTTY / Modifiy standard
> messages dialog) is sent. If your INSERT *scenario* message does not
> include a $INSERT command, it will not work.
>
> You must always consider the SO2R scenarios as "automating" TX switches,
> RX switches and using the "regular" messages.
>
> 73
>
> Larry - F6FVY
>
> --
> There are 10 kinds of people in the world - those who understand binary
> and those who don't.
>
> ______________________________**_________________
> Support mailing list
> support at win-test.com
> http://lists.f5mzn.org/cgi-**bin/mailman/listinfo/support<http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20111112/04bbc3ab/attachment.html>