[WT-support] Delay after $LOGGEDCALL

Filipe Lopes ct1ilt at gmail.com
Fri May 27 20:53:25 CEST 2011


Bob,

even in the Winkey monitor the space is there although I dont have it.
Please see bellow:

0004041656:  H-TX: 02 28 43      [Set WPM Speed: 40] C
0004041687:  H-RX: C4      [status: WAIT=0, KEYDOWN=0, BUSY=1, BREAKIN=0,
XOFF=0]
0004042046:  H-RX: 43     C
0004042046:  H-TX: 52     R
0004042343:  H-RX: 52     R
0004042359:  H-TX: 36     6
0004042765:  H-RX: 36     6
0004042765:  H-TX: 4B     K
0004043109:  H-RX: 4B     K
0004043125:  H-TX: 20
0004043281:  H-RX: 20 C0       [status: WAIT=0, KEYDOWN=0, BUSY=0,
BREAKIN=0, XOFF=0]
0004043281:  H-TX: 1C 30 35      [Change Speed Buffered: 48WPM] 5
0004043328:  H-RX: C4      [status: WAIT=0, KEYDOWN=0, BUSY=1, BREAKIN=0,
XOFF=0]
0004043578:  H-RX: 35     5
0004043578:  H-TX: 4E     N
0004043765:  H-RX: 4E     N
0004043781:  H-TX: 4E     N
0004043968:  H-RX: 4E     N
0004043968:  H-TX: 7C 1C 28 54     | [Change Speed Buffered: 40WPM] T
0004044156:  H-RX: 54     T
0004044156:  H-TX: 54     T
0004044328:  H-RX: 54     T
0004044328:  H-TX: 31     1
0004044921:  H-RX: 31     1
0004044921:  H-TX: 20
0004045062:  H-RX: 20
0004045078:  H-TX: 02 00      [Set WPM Speed: speed pot]
0004045078:  H-RX: C0      [status: WAIT=0, KEYDOWN=0, BUSY=0, BREAKIN=0,
XOFF=0]



2011/5/27 Filipe Lopes <ct1ilt at gmail.com>

> Hi Bob
>
> sorry for answering only now but I only arrived today at the contest QTH.
>
> Please see my inputs bellow.
>
> 2011/5/25 Bob Wilson, N6TV <n6tv at arrl.net>
>
> Filipe,
>>
>> Did you look for extra blanks in your F2 message?
>>
> No extra blanks found
>
>
>> Did you specify "CT Space" in WKSETUP?
>>
> YES
>
>> Did you type NOSOUND [Enter] in the logging window?
>>
>  YES
>
>> Did you select "Custom" CW cut number abbreviations and use a blank for
>> leading zeros?
>>
> I tried all the options
>
>> Did you type NOLEADZERO in the logging window?
>>
> YES
>
>> Did you try COM port CW keying instead of WinKey?
>>
> No
>
>> Did you try disabling the microHam control port, then use virtual Com port
>> or LPT port pins for radio switching (Classic Auto control) instead of the
>> microHAM control protocol?
>>
>  No
>
>> Did you set PTT Lead time to 0?
>>
> No
>
>> What version of Win-Test, Router, and Winkey chip are you using?
>>
> I am using Win-Test v4.7.0 router 7.7.5 and I donno where to check the
> Winkey chip on the u2R from microHam but I updated everything to the new
> versions.
>
>> If you still can't fix it, the only way I can help is for you to send me
>> your log (.wt4 file), your WT.INI file (File | Explore | /cfg directory),
>> your Advanced_SO2R.ini file, and screen shots of your microHAM router setup
>> (Ports, PTT, Winkey, and SO2R tabs).
>>
>> 73,
>> Bob, N6TV
>> On May 25, 2011 12:38 PM, "Filipe Lopes" <ct1ilt at gmail.com> wrote:
>>
>
> I guess I am gona have to live with this delay for this contest... which is
> a pain.
>
> Something curious I see is in the WK echo on the router, there is always a
> space between the call and 5NN even though I dont have any space!!
> example:
>
> CR6K 5NNTT1
>
>
>
> --
> Regards/Cumprimentos,
> Filipe Lopes CT1ILT aka CR6K
> http://www.rep.pt/ct1ilt
>
>
>


-- 
Regards/Cumprimentos,
Filipe Lopes CT1ILT aka CR6K
http://www.rep.pt/ct1ilt
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20110527/e7a3bea9/attachment-0001.html>


More information about the Support mailing list