[WT-support] WT4 & FT-5000 VFO selection

[Bob Wilson, N6TV]

What happens when you install and configure
OmniRig<http://www.dxatlas.com/omnirig>,
then change the radio type in Win-Test from FT2000 to OmniRig?  Does it work
any better?

73,
Bob, N6TV

On Thu, Mar 10, 2011 at 3:44 PM, F4DXW <f4dxw at free.fr> wrote:

>  Hello
>
> I Have the same problem with my FT2000.
>
> Thank you
>
> F4DXW  Stéphane
>
>
>
> Le 08/03/2011 08:13, Alan Jubb - 5B4AHJ a écrit :
>
> Hi
>
>  I am just setting my station up for this weekend's RSGB Commonwealth
> Contest.
>
> I am using WT4 version 4.7.0, communicating with my FT5k via a micro KEYER
> II.
>
>  If the FT5k is not in SPLIT mode, the band indication in WT4 is the band
> for the live VFO - that's OK.
> However, in SPLIT mode, it does the following:
>
>  If I am running on VFO-B, ie both VFO-B RX & TX and TX lamps illuminated
> on the 5k, and also have the VFO-A Rx enabled, the band info is again from
> VFO-B, which is OK.
> However, if I am running on VFO-A, and the VFO-B Rx is also enabled, WT4
> takes the band info from VFO-B, which is NOT OK.
>
>  If I want to operate SO2V, running on VFO-A and also listening (on
> another band) on VFO-B, I will get my QSOs logged on the wrong band. I would
> expect WT to take the band info from the VFO that is TXing. Why doesn't it?
> Is there a setting I can change to fix this?
>
>  Thanks.
>
> --
> 73
> Alan 5B4AHJ-5B50J-P3J
>
>
> _______________________________________________
> Support mailing listSupport at win-test.comhttp://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20110310/a680b21f/attachment.htm