[WT-support] u2R + Win-Test

[DF5RF]

Hello Filipe,
OM7ZZ provided a private hot fix for the microham u2r, hopefully it will 
be public soon. Just send him an email (support at microham.com), the 
response was really excellent.
You aloo need to update the u2r-router software to version 7.7.5. This 
solved all my SO2R-timing problems with Wintest 4.7.
73 Gernot, DF5RF

Am 16.05.2011 09:55, schrieb Filipe Lopes:
> Hi Bob, thanks for answer.
>
> See my comments bellow please.
>
> 2011/5/15 Bob Wilson, N6TV <n6tv at arrl.net <mailto:n6tv at arrl.net>>
>
>     On Sun, May 15, 2011 at 2:44 AM, Filipe Lopes <ct1ilt at gmail.com
>     <mailto:ct1ilt at gmail.com>> wrote:
>
>            1. When running and pressing INS key there is a delay between
>               the Call and the 599+exch, I tried the ^ and even took the
>               space in INSERT key assignment, so, the delay is always
>               there even if I have ($LOGGEDCALL^$F2) or
>               ($LOGGEDCALL$F2), any ideas where does this very litlle
>               delay comes from?
>
>     Try SETUP [Enter] [OK] to reset all COM ports.  If that doesn't fix
>     it, make sure both PTT lead/tail delay is set to 0 ms in Win-Test
>     WKSETUP (Options | Winkey configuration...), /and/ in the microHAM
>     router *Winkey* tab.  I think the default delay is 50 ms.
>
>
> I tried SETUP [ENTER][OK] several times and it is the same. The delay in
> the PTT/Tail is set to 0 ms both in the router and win-test. The space
> added between the loggedcall and the F2 is really disturbing and when
> you running a pile up it will slow you down. Isn't there any other way
> to change the spacing between the $loggedcall and $F2?
>
>            1. When CQing on RADIO 1 and suddenly press ESC the audio
>               doesn't switch back to the 2 Radios, it keeps only on
>               RADIO 2, ideas?
>
>     This issue was reported as Task #305
>     <http://flyspray.win-test.com/index.php?do=details&id=305> back in
>     January.  If you disable REPEAT mode (NORPT [Enter]), or use LPT
>     keying instead of Winkey keying, the problem goes away.  It may also
>     go away with COM port DTR pin keying.
>
>
> I disabled the REPEAT mode and nothing happened, still the same. I
> really wanted to use the Winkey so I had no need to use a LPT cable...
>
>
>     73,
>     Bob, N6TV
>
>
>
>
> --
> Regards/Cumprimentos,
> Filipe Lopes CT1ILT aka CR6K
> http://www.rep.pt/ct1ilt
>
>
>
>
> _______________________________________________
> Support mailing list
> Support at f5mzn.org
> http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support