[WT-support] Version 4.8.0

[Ulrich Mauer]

What are the advantages of the new version.

I tried to find something, but I could only find something about version 4.7.0

73 Ulrich DK9UMA

Contestgroup Wittgenborn www.DP6T.de


  ----- Original Message ----- 
  From: Jorge K 
  To: support at win-test.com 
  Sent: Wednesday, July 06, 2011 8:16 PM
  Subject: Re: [WT-support] TS-590 COM settings


  Hi Harry:
  Using a real RS232 I use 19200  N 1  DTR Handshake RTS always on  and Don´t poll unchecked. Put in menu 61 same baudrate. After changing baudrate turn transceiver off and on.
  Using firmware 1.04.
  73
  Jorge LU5V V 





------------------------------------------------------------------------------

  On 6 Jul 2011 at 10:30, Bob Wilson, N6TV wrote:


  Hi Harry,


  Are you using the Kenwood (HF) defaults, with DTR and RTS set to "Always OFF"?   Are you also using a USB-to-Serial adapter instead of a "real" serial port?  Some of these USB-to-Serial adapters may require DTR to be set to "Always ON".  Try that.


  Also in Win-Test, if the "Don't poll" checkbox is checked, UNCHECK it.


  If neither of these things seems to help, you may have to try a different USB-to-Serial adapter, preferably one based on the FTDI chipset rather than one based on the Prolific chipset.  It is very hard to get USB-to-Serial adapters based on the Prolific chipset to work properly.


  If you are using a microHAM virtual serial port, we'll need more details about how it is configured.


  Another possibility is to try OmniRig for TS-590 support, rather than the support built-in to Win-Test.


  PA2A's comment about firmware 1.04 is also somewhat troubling.


  73,
  Bob, N6TV


  On Wed, Jul 6, 2011 at 10:07 AM, RA3AUU/P33W <ra3auu at srr.ru> wrote:
  Hi everyone,

  Trying to get Win-test working with TS-590 but not quite successful.

  Using 4800 8-N-2 at the Win-test side and 4800 at the radio side.

  The 590 follows Win-test commands (changing bands and modes, following
  cluster spots) but Win-test doesn't show any changes of the 590's
  frequency change.

  Any ideas ?

  73, Harry RA3AUU


  _______________________________________________
  Support mailing list
  support at win-test.com
  http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support




    


------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  support at win-test.com
  http://lists.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: <http://lists.f5mzn.org/pipermail/support/attachments/20110706/635d19fb/attachment.html>