[WT-support] F1

[Fulvio]

Hi Alfredo,

glad you've solved the problem thanks to the group replies ;-)

Looking forward to hear your signal here.

I will also be active during next ARRL CW using Win-Test v4.8-devel.

PS:  Just for the info to the group. I was able to attend the CQ WPX
RTTY contest last week end using Win-Test It was a great experience!.
I just had to modify some standard messages but was on the air quickly
without any problem.

Best 73 de HB9DHG Fulvio
http://www.hb9dhg.ch


2011/2/15 Alfredo Vélez WP3C <wp3c at aol.com>:
> Bob
>
>  I fixed it, the problem was that I had it on Advanced SO2R, I changed it
> to SO1R and done! I will work ARRL in SO1R. Thanks and 73’
>
>
> Alfredo Vélez WP3C/NP4DX
> Skype: wp3c.pr
> e-mail: mailto:wp3c at aol.com
> Web: http://www.wp3c.qth.com/
>
>
>
> From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
> Behalf Of Bob Wilson, N6TV
> Sent: Monday, February 14, 2011 8:10 PM
> To: support at win-test.com
> Subject: Re: [WT-support] F1
>
> 2011/2/14 Alfredo Vélez WP3C <wp3c at aol.com>
> I’m setting up the Wintest to the ARRL in CW, but I have a problem. The F1
> transmit TEST, I change it and it keeps transmitting the same and I can’t
> change it. (Ex. CQ TEST WP3C WP3C TEST)  Please any help will be well
> received.
>
> Chances are Win-Test is in S&P mode, and the S&P mode F1 message is set to
> something else (like TEST).  Press Shift F1 to change the message, (or type
> MSGS [Enter] in the logging window).
>
> To see what mode you are in, select Windows | Clock and look for the word
> "RUN" or "S&P" in the right hand side of the clock window.  To toggle to RUN
> mode, press Ctrl-Tab.
>
> If you really don't care about RUN or S&P mode, and you just want the F1 key
> to send the same thing every time, type NORUNSP [Enter] in the logging
> window.  In the MSGS dialog, under the "Options" tab, you can also check
> "Ignore S&P messages."
>
> Another possibility is that F1 has been assigned to run a script, and the
> script plays one of the alternate messages (Alt-C).   Type SCRIPTS [Enter]
> in the logging window to check this.  Or perhaps F1 was redefined using
> DEFINEKEYS ?
>
> If you still cannot figure out what is wrong, send me your .WT4 file and
> your WT.INI file (found by doing File | Explore / cfg directory).
>
> 73,
> Bob, N6TV
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>