[WT-support] MicroHAM CW-Keyer to Win-Test

[contest at oz0j.dk]

Sorry for late reply but we changed the radio and the MicroHAM box during
the IOTA contest.

>> CI-V baud rate 19200  (not AUTO)
>> CI-V address 5Ch
>> CI-V transceive ON

I changed the address from 50 to 5ch in the radio. The other 2 were correct.

> You also have to set up the proper radio type and CI-V address in the
Router
> software.
>
> 1st under Ports - CAT - Set
> 2nd under System Settings CI-V port settings

I cannot find anywhere to change the HEX address beside the MicroHAM
software and it has been changed.

The link to the setup is on
http://dl.dropbox.com/u/2651703/Default%20settings%20for%20at%20IC756pro.doc
and now it is the correct link :-)

I have tried with stopbits 1 or 2, with poll auto, poll 100 and poll 200
and with/without "don't poll" and with/without "use CI-V Transceive"

I have also tried to setup Logger32 with the same settings without luck.
It could be the setup from the MicroHAM CW-keyer that does not transmit
the settings to the Win-Test program.

BTW Winkey is working for CW without problem.

The station is not mine. BTW the computer is running Win7 64 bit. Could
that be the problem?

73,
Jorgen OZ0J


And thanks for the setup to RUN and S&P mode.