[WT-support] ft1Kmp - MMTTY - Microham Mcrokeyer - WinTest -questions

[Ron Castro]

You need to re-tune the passband of the receiver to match the exact spot 
where the RTTY signal you're trying to copy is.

            Ron  N6IE
       www.N6IE.com

----- Original Message ----- 
From: "Paul Brice-Stevens" <paul at g0wat.demon.co.uk>
To: <support at win-test.com>; <microHAM at yahoogroups.com>; 
<FT-1000MP at yahoogroups.com>
Sent: Saturday, September 25, 2010 9:16 AM
Subject: [WT-support] ft1Kmp - MMTTY - Microham Mcrokeyer - 
WinTest -questions


>  Just 'trying' to give CWW rtty a go (complete new boy on the RTTY
> contesting front)...I think I have WT and MMTTY set-up OK (as per the
> info on Microham USA website) ...however oddly I decode OK in the 2.4Khz
> position...there appears enough 'signal' in the MMTTY window however
> when I switch in the 500 or 250hz Filters(which are installed and turned
> on) for a bit more selectivity  I appear to get almost no signal in the
> MMTTY window and no decode?
>
> I'm patently an idiot and doing something wrong but I can't think what
> it may be?
>
> 73 Paul G0WAT
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>