[WT-support] problem comunication WT via micoHAM USB III -IC7700

[LA8AW]

There are 2 places to set the CI-V address;

1st under Ports - CAT - Set
2nd under System Settings CI-V port settings


_____________________

73 de LA8AW - Odd-Egil
_____________________


On Tue, Oct 26, 2010 at 21:35, Tõnno Vähk <Tonno.Vahk at gafm.ee> wrote:

>  I asked him to try 6E but he says that he cannot enter 6E into USB
> Router! But I try myself and it picks 6E as default so I guess he messed
> something up. It should probably work with 6E.
>
>
>
> Thanks.
>
>
>
> *From:* support-bounces at win-test.com [mailto:support-bounces at win-test.com]
> *On Behalf Of *9A5K
> *Sent:* Tuesday, October 26, 2010 12:24 PM
>
> *To:* support at win-test.com
> *Subject:* Re: [WT-support] problem comunication WT via micoHAM USB III
> -IC7700
>
>
>
> Tonno,
>
>
>
> default address for PRO III is 6E, if I remember it OK.
>
>
>
> However, he can check that in OTHER menu on TRX, where other communication
> parameters are show (CI-V, baud rate etc.)..
>
> Check the rate in TRX too..
>
>
>
> 73,
>
> Chris - 9A5K
>
>  ----- Original Message -----
>
> *From:* Tõnno Vähk <Tonno.Vahk at gafm.ee>
>
> *To:* support at win-test.com
>
> *Sent:* Tuesday, October 26, 2010 11:21 AM
>
> *Subject:* Re: [WT-support] problem comunication WT via micoHAM USB III
> -IC7700
>
>
>
> Actually ES5RY was having problem to get IC756 PROIII CAT to work. USB
> Router shows frequency and everything is fine but Win-Test does not read
> CAT.
>
>
>
> He used MK2R+ and settings:
>
>
>
> 19200, 8, N, 1. Address 50h. No settings in WT worked (CI-V on/off,
> handshake, always on/off, tried 4800 rate in the rig and USB router…)
>
>
>
> Any idea why WT might not read CAT while all fine in USB router? (same port
> of course and USB router says port opened)
>
>
>
> Can it be the problem of the address? Is 50h correct for PRO III?
>
>
>
> 73
>
> Es5tv
>
>
>
> *From:* support-bounces at win-test.com [mailto:support-bounces at win-test.com]
> *On Behalf Of *Bob Wilson, N6TV
> *Sent:* Tuesday, October 26, 2010 12:13 PM
> *To:* support at win-test.com
> *Subject:* Re: [WT-support] problem comunication WT via micoHAM USB III
> -IC7700
>
>
>
> On Mon, Oct 25, 2010 at 9:44 PM, sp7idx <sp7idx at interia.pl> wrote:
>
>  CI-V Baud Rate 19200
> CI-V Address 7Ah   <<<<<<<<<<<<<
> CI-V Transceive ON
> Decode Baud Rate 19200
>
>
>
> After several private messages back and forth, I finally noticed that this
> not the default CI-V  address for an IC-7700.
>
>
>
> Waldi changed the CI-V address back the default, 74h, then Win-Test worked
> fine.
>
>
>
> 73,
>
> Bob, N6TV
>  ------------------------------
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101026/5532de2f/attachment-0001.htm