[WT-support] IC-775DSP IF filter switching

[Bob Wilson, N6TV]

Gunar and Gedas,

Try specifying radio type:  OmniRig.  I think the problem will go away.

Download OmniRig from http://www.dxatlas.com/Omnirig/

First configure OmniRig for your radios, then start Win-Test.

Be *sure* not to select any radio COM ports in Win-Test when you set Radio
type to OmniRig. The COM port has to be "owned" by OmniRig, not Win-Test.

73,
Bob, N6TV
On Sun, Nov 7, 2010 at 8:36 AM, Gediminas Lucinskas <LY3BA at takas.lt> wrote:

> Exactly the same happens with my FT-990AC, while is OK when using N1MM.
>
> 73! Gedas, LY9A
>
> ----- Original Message -----
> From: "yl2gd" <yl2gd at lral.lv>
> To: <support at win-test.com>
> Sent: Sunday, November 07, 2010 4:39 PM
> Subject: [WT-support] IC-775DSP IF filter switching
>
>
> > Hi to all!
> >
> > Maybe somebody can show me the clue what I need to do to solve the
> > problem:
> >
> > Every time when I send info from PC to TRCVR (click the spot on bandmap
> > or directly enter frequency or mode from the keyboard) IC-775DSP switch
> > IF filters to WIDE (does not matter what mode or filters are used before)
> > Tried different COM port baud rates - no changes
> >
> > I have no this problem with exactly the same hardware setup using
> > Write-Log
> > soft.
> > I have no such problem with WinTest to control KENWOOD rigs (TS-950SD &
> > TS-790E)
> >
> > My setup:
> > WinTest  V.3.27
> > OS Win -98SE
> > Rig IC-775DSP
> > CI-V interface connected to real COM port
> >
> > TIA & 73! Gunar - YL2GD/YL6W
> >
> > _______________________________________________
> > Support mailing list
> > Support at win-test.com
> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20101107/0c6f318f/attachment.htm