[WT-support] WT Scripts for K3 vs. ICOM

[Helmut Mueller]

Hi Bob.
 
I tried several mutations of your code together with the icom handbook, but
unfortunately I did not get anything to work. The communication between WT
and the radio works in general, but it does not want to fire in the voice
keyer audio from the rig.
 
Any ideas ..anyone?
 
Thanks
 
Helmut
 
 
 
On Tue, Feb 23, 2010 at 1:14 AM, Helmut Mueller <
<http://www.f5mzn.org/cgi-bin/mailman/listinfo/support> helmut at
photo42.de> wrote:
 
>  I am preparing for WPX Phone and i am wondering if it is possible to use
> WT scripts to play ICOM Voicekeyer's just like the K3 ones using CAT
> interface?
> 
 
Yes, I think it should be possible for some models.  What model of Icom do
you have?
 
Here's a script that *may* work for playing DVR (DVK) message M1 on an
Icom-7800 at the default address 6A, with the default controller address E0:
 
-- Icom IC-7800 Script to play DVR Message M1
-- Written by N6TV, 23 Feb 2010
if (wtQso:IsModePhone()) then          -- If SSB or FM contact
   wtRadio:SendHex("FEFE6AE01A0201FD") -- Play M1
   return -1                           -- No further keystroke procesing
else                                   -- Else, not phone
   return 0                            -- Normal keystroke procesing
end
 
I'd appreciate it if someone with an IC-7800 could try it.  Just save the
lines above to a file named PlayM1.wts in your WT4 Scripts folder (File |
Explore | Scripts /directory), assign it to F1 using Tools | Scripts Manager
| Properties | Define.  Then open a phone log and press F1 to see if it
plays DVR message M1.
 
If you have an IC-7700 at default address 74, try:
 
-- Icom IC-7700 Script to play DVR Message M1
-- Written by N6TV, 23 Feb 2010
if (wtQso:IsModePhone()) then          -- If SSB or FM contact
   wtRadio:SendHex("FEFE74E01A0201FD") -- Play M1
   return -1                           -- No further keystroke procesing
else                                   -- Else, not phone
   return 0                            -- Normal keystroke procesing
end
 
If it works, I should be able to recreate most of the scripts I've done for
the K3 for the IC-7800 and IC-7700.
 
73,
Bob, N6TV

 

 

 

73sss

 

Helmut

 

 <http://www.df7zs.de> www.df7zs.de 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20100226/6ab33932/attachment.htm