[WT-support] RTTY ES K3

[ken chandler]

Hi Dennis
Thanks for the reply.
Have no tx on radio,
Have AFSK A set on k3 this is wot is normally use.
I have an error message, cant open com6! ......Com6 is working ok coz Wt is
seeing the radio ok!

Ken..G0ORH

-----Original Message-----
From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of W1UE
Sent: 12 February 2010 14:18
To: support at win-test.com
Subject: Re: [WT-support] RTTY ES K3

Ken

Several ideas:
1. Put your K3 into xmit mode manually.  Will it then transmit?
2. Do you have the correct data mode selected?  Push "DATA MD" see if 
the correct mode is selected.
3. If 1 and 2 both pass, then you have your PTT set incorrectly. 
MMTTY-Setup MMTTY-Tx tab, there is a drop down box to set the PTT port. 
  That must agree with your FSK port.

It sounds like you're getting close.

Dennis W1UE


ken chandler wrote:
> I'm trying to run WT and a K3. I have WT & MTTY hooked up talking to 
> each other but cannot find a way to tx, not sure wot's the problem.
> 
> I tried Air Link Expess and the radio does transmit in both rtty es psk.
> 
>  
> 
> Any ideas would be great!
> 
>  
> 
> Ken..G0ORH
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support