[WT-support] Advanced SO2R problem

[Bob Wilson, N6TV]

Correction, should have changed it to

wtApp:SendFKey("Insert")

Update attached.

73,
Bob, N6TV
On Wed, Aug 4, 2010 at 6:05 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> OK I think I see the problem.  Both the ESM script embedded into Win-Test<http://docs.win-test.com/wiki/API#ESM_Script_.28embedded_into_Win-Test.29>and the F5VIH Alternative
> ESM script<http://docs.win-test.com/wiki/API#Alternative_ESM_Script_.28provided_by_F5VIH.2FSV3SJ.29>do:
>
> wtKeyer:Play("$INSERT");
>
> and
>
> wtKeyer:Play("$PLUS");
>
> on CW, which completely bypasses everything you set up in the Advanced SO2R
> Scenarios.
>
> If you change those lines to
>
> wtApp:SendFKey("F2");
>
> and
>
> wtApp:SendFKey("PLUS");
>
> then it seems work as you want it to.  The same applies to most of the
> other functions.
>
> Try the attachment as a start (more editing required).  Copy it to your
> Scripts folder (in Win-Test, File | Explore | /scripts directory).
>
> I've opened Task #285<http://flyspray.win-test.com/index.php?do=details&id=285>to track this problem.
>
> 73,
> Bob, N6TV
>
>
> On Wed, Aug 4, 2010 at 4:08 PM, <mike at sm3wmv.com> wrote:
>
>> No, the problem is that even though I don't change from "Plane pileup" as
>> scenario what happens when I use ESM and INSERT are not the same.
>>
>> When I press insert it is behaving as expected, which means first
>> switching over to $R2R2 $INSERT $R1R2, but when I do the same with ESM it
>> shifts to whatever audio configuration I have selected.
>>
>> If you try this and see if you get the same result as me,
>>
>> 1. Select "Plain pileup" standard scenario
>> 2. Write for example SJ2W in the callsign field and press INSERT
>>
>> It should now switch over to R2R2 during TX and back to R1R2 after TX is
>> over.
>>
>> 3. Enter some report, press + and it should switch to R2R2 during TX and
>> back to R1R2 afterwards.
>>
>> 4. Now clear the callsign field with ALT+W, enter SJ2W and press enter
>> with ESM mode enabled.
>>
>> For me, it now just stays with BOTH for AUDIO, so it does not work the
>> same way as INSERT does.
>>
>> 5. Now enter some report and press ENTER again, the audio stays on BOTH
>> for me.
>>
>> So the problem is not in the scenarios but somehow how ESM works.
>>
>> Mike, SM2WMV (SJ2W)
>>
>> > On Wed, Aug 4, 2010 at 2:10 PM, <mike at sm3wmv.com> wrote:
>> >
>> >>
>> >> When I however use ESM instead, and I press enter when I have entered a
>> >> callsign the audio remains in BOTH position. If I however just press
>> >> enter
>> >> with the field empty its does throw out a CQ and switches audio over to
>> >> R2.
>> >>
>> >> Is this a bug?
>> >>
>> >
>> > "Plane Pileup" is programmed to do that:
>> >
>> > INSERT:  $R2R2 $INSERT $R1R2
>> >
>> > In ESM mode, the INSERT message is sent when you have a callsign in the
>> > exchange field and you press [Enter].
>> >
>> > The F1 message is sent when you don't have a callsign in the exchange
>> > field.
>> >
>> > From the Win-Test menu, select Operating | Modify the Scenarios ... and
>> > change the run column for Primary Radio to
>> >
>> > INSERT:  $R2R2 $INSERT $R1R1
>> >
>> > Does that do what you want?
>> >
>> > 73,
>> > Bob, N6TV
>> > _______________________________________________
>> > Support mailing list
>> > Support at win-test.com
>> > http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>> >
>>
>>
>> _______________________________________________
>> Support mailing list
>> Support at win-test.com
>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20100804/34cf42ed/attachment-0001.htm 
-------------- next part --------------
A non-text attachment was scrubbed...
Name: esm.wts
Type: application/octet-stream
Size: 5055 bytes
Desc: not available
Url : http://www.f5mzn.org/pipermail/support/attachments/20100804/34cf42ed/attachment-0001.obj