[WT-support] Configuring WinTest to support SCK-II SO2R Box

[Bob Wilson, N6TV]

You also have to select Operating | Technique | SO2R from the Win-Test menu.

On Sat, Sep 26, 2009 at 10:56 AM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> On Sat, Sep 26, 2009 at 8:14 AM, <kd4d at comcast.net> wrote:
>
>> How can I configure WinTest to support an SCK-II?  This is an SO2R
>> controller
>> with a built-in DVK driven from the parallel port.
>>
>
> See http://docs.win-test.com/wiki/Menu:Options#Printer_Ports .  Assuming
> the SCK-II is compatible with legacy DVKs that used LPT pins, checking the
> "DVK" pins in this LPT port dialog should allow you to control it from
> Win-Test.
>
> SO2R control is also done via pin 14 (TX) and Pin 9 or 5 (RX).
>
> Win-Test does not know the length of the DVK messages, so if you want to do
> alternating CQs, you'll have to control that manually via the [*] key (which
> swaps the transmitting radio by changing the state of pin 14).
>
> 73,
> Bob, N6TV
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090926/c77bc734/attachment.htm