[WT-support] Registration Question

[Bob Wilson, N6TV]

You can still get a V3 key after buying V4, just email the required
info to F6FVY (call, acct no. & computer codes).

73,
Bob N6TV

On 9/24/09, Robert Pack, NX5M <nx5m at txcyber.com> wrote:
> Yes, I am 100% sure I have taken the proper steps.  However, I did register
> V4 but am not using it because it will not run on some of the computers I
> have here (WIN98 for example) and I did not know that this would happen
> until after I had registered V4.  When I got to the 98 machines, which were
> the last ones out of the group, that is when I found that V4 would not run.
> I am not going to buy 3 more computers so I guess I have just hit a brick
> wall.  It is not important that I had wintest running on the last 2
> computers, but I have to stick with V3 because a couple of the computers in
> my station setup are WIN98 machines and I have to use them.
> No big deal.......thanks for the reply.
>
>   ----- Original Message -----
>   From: Bob Wilson, N6TV
>   To: support at win-test.com
>   Sent: Thursday, September 24, 2009 3:47 PM
>   Subject: Re: [WT-support] Registration Question
>
>
>   Did you just copy your entire Win-Test folder from one computer to
> another?  Don't do that, as that will prompt a re-register (WT.INI will get
> overwritten).
>
>   After registering, it is important to cleanly close Win-Test to ensure
> that reg. key is written to WT.INI.  If you're just rebooting Win98 or
> powering down, that may not be happening.  Look in your WT.INI file in your
> Win-Test installation directory (for V3) to see if the reg. key is "taking".
>
>   Remeber each PC has to request its own unique reg. key.  They are unique
> to every computer.  You can't share a single reg. key between two computers,
> but you only have to have to buy one license, for all of your computers.
>
>   Did you ever register for WT V4?  Once you do that, you will only be able
> to get Win-Test V4 reg. keys from the website.  V4 reg keys will not work
> with Win-Test V3.
>
>   If this doesn't answer your questions, please tell us step-by-step what
> you are doing to register the PC, and what you see when you restart
> Win-Test.
>
>   In sum, install Win-Test clean, select Help | Register Win-Test on each
> computer.  Paste the unique computer code into the Win-Test web site and
> request a registration key for that computer. Paste the registration key
> (received via email) into the register Window for each computer, one at a
> time (different codes).  Close and restart Win-Test.  You should no longer
> be prompted as if in demo mode.
>
>   73,
>   Bob, N6TV
>
>
>   On Thu, Sep 24, 2009 at 11:43 AM, Robert Pack, NX5M <nx5m at txcyber.com>
> wrote:
>
>     I have a couple of computers running WIN98 that I wanted to register
> Wintest on simply so that those monitors will display rate and summary
> information.  Downloaded 3.26.0, installed and registered but I am still
> being told that they are NOT registered.
>
>     What am I missing?
>
>     Bob
>
>
>
>
> ------------------------------------------------------------------------------
>
>
>   _______________________________________________
>   Support mailing list
>   Support at win-test.com
>   http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>