[WT-support] Radio data lost with K3

[Bob Wilson, N6TV]

Don,

Were you using a *real* serial port between Win-Test and the K3, or a
virtual serial port via a USB-to-Serial converter or microHAM box?  What
type?  What version of device driver / router?

73,
Bob, N6TV

On Thu, Oct 8, 2009 at 3:12 AM, Don Beattie <g3ozf at btinternet.com> wrote:

> Toni,
>
> I have just got back home from FO ( Australs ) and ZK2 Niue, where I was
> using the K3 and Win-Test.
>
> I noticed loss of link from time to time, but did not assume it was a WT
> issue.
>
> However, I did notice that the problem did not seem to happen if I set
> radio
> to "Kenwood" on WT - which also works with the K3.
>
> I don't know it this helps.
>
> 73
>
> Don, G3BJ
>
>
>
> ----- Original Message -----
> From: "Toni Lindén" <oh2ua at oh2u.com>
> To: <support at win-test.com>
> Sent: Wednesday, October 07, 2009 6:34 PM
> Subject: [WT-support] Radio data lost with K3
>
>
> > Hi!
> >
> >
> > For some reason Win-Test seems to lose radio data every once in a
> > while when using K3 radios and microHam router.
> >
> > Setup here: WT 4.1.0 + microHam router 7.2.4. + K3 with latest FW.
> >
> > When WT's been running for a while, router lose radio data (and MK2R+
> > says busy). If I close the WT, QRG information returns as soon as WT
> > is been terminated.
> >
> > Haven't had similar problems ever before with FT1000MarkV or with FT2000.
> >
> > I found this behaviour crucial because I don't want to turn logging SW
> > off every hour or two hours.
> >
> >
> > 73 de Toni, OH2UA
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20091008/6d4271ab/attachment.htm