[WT-support] Communicationproblem wtDXtelnet with DX-Cluster Monitor /DXSpotwindow

[Wolfgang Schwarz -DK9VZ-]

Hi Olaf

thats a normal network problem
When you are using the USB-Modem, your windows PC has no cable connected
to the network port and therefore Windows switches down the network port 
then.

You need another adressing in the network, when you use an UMTS-Stick
Try to enter in the network config of WT and (!!) WTdxTelnet the following
Broadcast-Address 127.255.255.255 and it will work with the USB-Stick.

But you have to change that every time you go byck to your DSL-Network
So remember the settings as they are today

/*73 de*/
/*Wolfgang DK9VZ*/
ws at dk9vz.com <mailto:ws at dk9vz.com>

http://dk9vz.com
http://kontest.de
http://F-27.de <http://f-27.de>




Olaf Brunner schrieb:
> Hello WTuser,
>  
> I'm using a  Inet-Stick (USB-Modem-Stick) for my portableQTH and 
> wtDXTelnet runs fine but there is no possibility to 
> communicate/connect  with the with DX-Cluster Monitor /DXSpotwindow in 
> my Wintest. ... this windows doesn`t show any spots.
> If I run my home dsl there are no problems.
>  
> The firewall switched off for this case but no reply to the dxwindow 
> any time.
>  
> Who can help?
>  
> 73 de Olaf dl7cx
>  
>  
> ------------------------------------------------------------------------
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>