[WT-support] DVK w/microKeyer II?

Tue Mar 3 05:37:31 CET 2009

Hi there everybody...

Talking about DVK on Wintest... Is any way to transmit the callsings characters one bye one? (pre recording one bye one, A to Z, 0 to 9)?? Like CW or RTTY?? But recording character by character... The WT can recognize or work on this way on SSB?

Chears

José YV5TX

----- Original Message ----- 
From: Bob Wilson, N6TV 
To: support at win-test.com 
Sent: Monday, March 02, 2009 6:29 PM
Subject: Re: [WT-support] DVK w/microKeyer II?

Sound card output levels are adjusted in the microHAM Router's "Audio Mixer" tab unless you are using Windows Vista.  Use the [Test] button.

On the microHAM Router's "Audio Switching" tab you need to select something like "ACA" so that when the computer generates PTT on the virtual PTT channel, the sound card output is switched to the radio mic. jack.  Win-Test must do the PTT via the same virtual COM port.

In the Win-Test SETUP (Interface Configuration) you must select device type "microHAM MK/MKII" for COMn, where COMn is the CONTROL port defined in the microHAM Router's "Ports" tab.  This means you have a microHAM microKEYER (not an MK2R or MK2R+ SO2R box).

If you still can't get it to work, please post screen shots of all of your interface setup screens on the web somewhere so we can have a look.

To take a screen shot on Windows:

  1.. Have the screen or you want to take a screen shot of, in the foreground. 
  2.. Hold down CTRL + ALT + SHIFT + [PrintScreen] (this will take a picture of the open foreground window only)
    a.. Hitting Shift-[PrintScreen] alone will take a picture of the entire screen
  3.. Open the Windows Paint Program (Start, Programs, Accessories, Paint) 
  4.. EDIT, PASTE. The image of the window you just captured will appear in Paint
  5.. FILE, SAVE AS
  6.. Enter a file name and Select Save as type:  PNG (.PNG)  (looks better than JPG for screen shots, and takes less space) 
  7.. FILE NEW, and repeat steps 1, 2, 4 and 5 for the other setup windows. 

73,
Bob, N6TV

On Mon, Mar 2, 2009 at 2:15 PM, TMorton <cx7tt at 4email.net> wrote:

  Hello,
  I have set up the mK II iaw the setup guide for WT but can not get the
  DVK to work properly. I have tried both the 'enable' sound card and also
  the mK II option in the config menus. Anybody out there running mK II
  with WT and K3?
  Would appreciate some guidance. The only way I can hear the msgs are to
  either open mK II, change audio switching and PTT to line rear only and
  use the mK II DVK or to record using the shift+F*...when doing that, the
  audio is very thin and drives the K3 to 1/2 power...i.e., only 50 out of
  100w....
  Tnx
  Tom
  CX7TT
  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support

--------------------------------------------------------------------------------

_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090303/ddadbb33/attachment-0001.htm 