[WT-support] FW: ARRL DX KH6

[Bill AC0W]

Okay found 3.26.0-dev solved the problem. However upon exiting I receive an
application error as follows:
 
WT:wt_dev.exe-Application Error
 
The instruction at "0x005870ad" referenced memory at "0x01ff407e". The
memory could not be "read".
 
Bill
AC0W

  _____  

From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Bill AC0W
Sent: Wednesday, February 25, 2009 10:09 PM
To: WIN-TEST
Subject: [WT-support] FW: ARRL DX KH6


Forgot Version 3.25.1
 
Bill

  _____  

From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Bill AC0W
Sent: Wednesday, February 25, 2009 10:06 PM
To: WIN-TEST
Subject: [WT-support] ARRL DX KH6


I saw a little discussion of this for ARRL DX CW. I'm setting up Win-Test to
operate portable from KH6 for ARRL DX Phone. Is there a way to force the
ARRL DX configuration to be from the DX side?
 
I've done a test QSO and it won't do W/VE multipliers or assign points to
W/VE QSO's.
 
The configuration window I have the following settings:
 
Call: KH6/AC0W
DXCC: KH6
WAZ Zone: 31
ITU Zone: 61
Contest: ARRL DX
 
I am missing something to get this to recognize that I will be DX and not
W/VE?
 
Thanks,
 
Bill
AC0W
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090225/0431730e/attachment.htm