[WT-support] win-test and microkeyer

[Rick Dougherty NQ4I]

Hi Bob...well you were right on the money..I had been coordinating with Rick
K4TD and we had too many things configured..it takes an Audio Control
Setting of ACA, and a virtual comport with PTT enabled...I had also been
selecting Control and WinKey as settings and they are not required..its
working fine..just had to adjust the pot on the side of the case for audio
levels and Viola!!! its now working nicely...the CW part is really fine
too..I have 3 more MicroKeyers coming and they will be a big asset in my M-M
station here..thanks for your input..de Rick

2009/2/24 Bob Wilson, N6TV <n6tv at arrl.net>

> 2009/2/24 Rick Dougherty NQ4I <nq4i at contesting.com>
>
>> Hi all...just added a WinKeyer to one of my stations...got it working on
>> cw with Win-Test pretty quickly...but on ssb another problem....anybody
>> successful using Win-Test with Winkeyer on ssb with Yaesu FT-1000D??? I am
>> sure that I am close just need a little guidance...thanks de Rick NQ4I
>>
>
> 2009/2/24 Rick Dougherty NQ4I <nq4i at contesting.com>
>
>> my mistake on the previous post...I am using Micro Ham MicroKeyer and
>> Win-test..de Rick NQ4I
>
>
> See http://www.microham-usa.com/appnotes/appnote38.pdf for instructions on
> connecting your PC sound card to your microHAM microKEYER.  Note the section
> on PTT.  If you are using VOX select "A", if you are using Win-Test to
> generate PTT via a COM port, select "B", and if you are using a footswitch
> plugged into the back of the mciroKEYER select "C".
>
> In Win-Test Interface configuration<http://docs.win-test.com/wiki/Menu:Options#Configure_interfaces...>check "Enable sound card" and select the appropriate sound card.
>
> Program one of your virtual COM ports for PTT (aka "Other interface").  Use
> the same COM port as defined in the microKEYER Ports tab for PTT.  Press the
> [Configure] button on the Interface configuratoin screen, next to that
> "Other inteface" COM port, and set RTS (Pin 7) to PTT, then press [OK].
>
> To program the CQ message, Press [Shift-F1] and speak into the microphone,
> then click [STOP] to halt the recording.  Repeat the process for your other
> messages.
>
> To play back the message, press [F1].
>
> 73,
> Bob, N6TV
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090225/2db068aa/attachment.htm