[WT-support] EXCHANGE IN RTTY CONTEST

[José Robaina M. (YV5TX - 4M5R)]

Hi again guys... the problem was solved... A bad configuration in the
contest starting configuration window (we was choose DIGITAL modes, when the
correct config is RTTY)

So another thing... I'm observing in my laptop with any version of WT from
several time ago (I don't know if this thread was touch in past) that I have
an error "Packet Stream timed out"... I was try all things. What I missed?

Thanks and sorry for all... 73

José YV5TX



2009/2/13 José Robaina M. (YV5TX - 4M5R) <jose.yv5tx at gmail.com>

> I'm forget to tell that we use the last version of WT. 3.25.0
>
> I'm simulating the contest in other PC with SO1R configuration setting and
> the problem persist.
>
> When I change the band, the sequence is not the same...
>
>
>
> 2009/2/13 José Robaina M. (YV5TX - 4M5R) <jose.yv5tx at gmail.com>
>
> Hi there...
>>
>> We're on M/S category with SO2R configuration (with the MK2R+). When we do
>> the band change, the NR not is correlative... Any time gives the 001 on the
>> first QSO in that band, when due the rules are:
>>
>> *VI. Exchange:* RS(T) report plus a progressive contact serial number
>> starting with 001 for the first contact. *"Multi-one and multi-two use a
>> single serial number sequence for the complete log"*.... and
>> multi-transmitter entrants use separate serial number sequences starting
>> with serial number 001 on each band.
>>
>> We have configured the technique op like SO1R at this time... We start
>> with SO2R advanced, with the same problem...
>>
>> We can't do the band change, until this problem could be resolved.
>>
>> We're doing somethign wrong??
>>
>> thanks
>>
>> José YV5TX
>>
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090213/8330dd76/attachment.htm