[WT-support] problems with win-test and micro-keyer

[Rick Dougherty NQ4I]

Hi Bob...comments included...de Rick

On Tue, Dec 1, 2009 at 3:43 AM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

>  On Sun, Nov 29, 2009 at 6:38 AM, Rick Dougherty NQ4I <nq4i at contesting.com
> > wrote:
>
>> We had a number of problems with Win-Test and MicroKeyer this weekend...I
>> am wondering if anyone else did too??
>>
>
> Others have reported similar problems in the past with the WKUSB devices,
> whereas other versions work OK.
>
> Which model of K1EL MicroKeyer?  WKUSB?  WKSerial?  Or microHAM MK2R /
> MK2R+ or ?  MicroHam MicroKeyer ( I have 10 of them and the problem appeared
> on 6 of them)
>
> Which microkeyer chip?  V21 or V22?  Win-Test reports what it detects
> during start-up.I see version 10 on most of the screens and one version 9
>
> Which virtual COM port are you using?  Any similarities or differences
> between the software configuration of the computers that worked vs. those
> that didn't, especially with respect to the virtual COM port number, or
> presence or absence of other USB-to-Serial adapters? Using virtual com3 for
> CAT, Com6 for PTT and Com 7 for Winkeyer and everything goes in and out via
> USB ports...I did notice that a few of my machines had WinTest 3.26 and some
> had 3.27...yesterday I loaded 3.27.1 into all of them..still had the
> problem...after everything is loaded and configured, when hitting F1 or F4,
> it will only send a single character of cw and then stop.....after a
> complete shut down and reboot it sometimes starts working, but not all the
> time...
>
73 de Rick NQ4I


>  73,
> Bob, N6TV
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20091201/c9afa679/attachment.htm