[WT-support] Problem with FT1000D

[Robert Pack]

I have had the same problem except on cw it sends me to the 2.4 filter on both the 1000D and 990 when I am on the 500 filter.  The filter selected on the radio should not change but it does.  I am noting this as I am still using 3.27.

Bob NX5M
  ----- Original Message ----- 
  From: Bob Glasgow 
  To: support at win-test.com 
  Sent: Thursday, August 06, 2009 9:08 AM
  Subject: [WT-support] Problem with FT1000D


  WINTEST configured for Radio FT1000 (No other choice) although actual radio is FT1000D

   

  Issue:

  Working CW and the FT1000D is set with a filter of 250Hz. The issue comes when clicking on a station that is in the BAND MAP which then as expected puts the radio on the correct frequency, puts all the details in the log. The problem is that it switches the FT100 to having a 500Hz filter. This caused an issue as on this specific radio there is no 500Hz filter and thus giving problem son the receive.

   

  Tried the same but this time a station was in the SSB section of the band, this time it changed the filter selection to 2.4K

   

  Could produce the above every time it was tried.

   

  I suspect that the details being sent in the CAT message from WINTEST, being set as a FT1000 are not the same details that the FT1000D requires.

   

  Can you help with this issue, many thanks.

   

  Regards,

   

   

   

  Bob Glasgow GM4UYZ

   

  Sec: Cockenzie & Port Seton Amateur Radio Club

  Email: bob.gm4uyz at talktalk.net

  Website: www.cpsarc.com 

  Tel: 01875 811723

   



------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090806/79d547a3/attachment-0001.htm