[WT-support] Problem with FT1000D

[Bob Glasgow]

WINTEST configured for Radio FT1000 (No other choice) although actual radio
is FT1000D

 

Issue:

Working CW and the FT1000D is set with a filter of 250Hz. The issue comes
when clicking on a station that is in the BAND MAP which then as expected
puts the radio on the correct frequency, puts all the details in the log.
The problem is that it switches the FT100 to having a 500Hz filter. This
caused an issue as on this specific radio there is no 500Hz filter and thus
giving problem son the receive.

 

Tried the same but this time a station was in the SSB section of the band,
this time it changed the filter selection to 2.4K

 

Could produce the above every time it was tried.

 

I suspect that the details being sent in the CAT message from WINTEST, being
set as a FT1000 are not the same details that the FT1000D requires.

 

Can you help with this issue, many thanks.

 

Regards,

 

 

 

Bob Glasgow GM4UYZ

 

Sec: Cockenzie & Port Seton Amateur Radio Club

Email:  <mailto:bob.gm4uyz at talktalk.net> bob.gm4uyz at talktalk.net

Website:  <http://www.cpsarc.com> www.cpsarc.com 

Tel: 01875 811723

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090806/4638b7bb/attachment.htm