[WT-support] WPX M1

[bdn70]

tnx, Jacques, but there is a difference between the Rules page (http://www.cqwpx.com/rules.htm) and the rules_2009.pdf (as published in the magazine):
VI. Exchange: RS(T) report plus a progressive contact serial

number starting with 001 for the first contact. Multi-two and multitransmitter

entrants must start with serial number 001 on each band.

Why to pay for a "false" publication ??...
bf

  ----- Original Message ----- 
  From: Jacques Saget 
  To: support at win-test.com 
  Sent: Wednesday, April 01, 2009 9:15 PM
  Subject: Re: [WT-support] WPX M1


  bdn70 a écrit : 
    Hello,

    The list contains already a lot of posts about serial numbering, but I haven't found anything for M/S1 category...
    The 2009 rules indicates separate numbers for the M2 and MM, but nothing is specified for M1.
    Using 3.25 version in network and TRX(run)+RX(multi) configuration, we were surprised to get also serials by band...
    Is there an operating mistake ?

    (For info, networking between 3.18/ XP and 3.25/ Vista 32 failed; it has been necessary to configurate XP with 3.25 and accomodate Vista to XP)

    73,
    Bernard F2BF
  Did you read all the rules ? 

  Exchange: RS(T) report plus a progressive contact serial number starting with 001 for the first contact. Multi-operator entrants must start with serial number 001 on each band. 

  Multi-operator means M/1, M/2 and M/M.

  73 de Jacques, F6BEE  (6W1RW S/All in WPX SSB)



------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20090402/65765702/attachment.htm