[WT-support] W-T and AFSK

[Thorsten - DJ6ET]

Hi Lup,

if you have no real ComPort, it is possible tu run FSK with a
USB-Serial-Interface by using a very simple FSK-Board with only two BC547
and using EXTFSK/COMFSK.DLL to run this with MMTTY. You only have to
download the COMFSK.DLL from WWW and copy it into you program-directory of
MMTTY.
IN MMTTY you have to setup the Com-Port "EXTFSK" thats all....
On the FT1000 you only have to set, that the FT1000 has to send RTTY in
Reverse-Mode und you can use the RTTY-LSB mode....so you will have no
problems by using FSK with Win-Test.

More details you will find an the RTTY-Homepage auf AA5AU, the FSK-Board,
details of COMFSK/EXTFSK,etc...



vy 73 de Thorsten - DJ6ET


-----Ursprungliche Nachricht-----
Von: support-bounces at win-test.com
[mailto:support-bounces at win-test.com]Im Auftrag von Lup S. DJ7SW
Gesendet: Freitag, 19. September 2008 10:00
An: support at win-test.com
Betreff: Re: [WT-support] W-T and AFSK


TNX for the hint Werner.....
But no change in behavior. I defined a bandplan without RTTY and one with
RTTY over the full band: no change, after a band change with Alt 1/2 i am in
RTTY LSB again. I tried to define other modes, but MMTTY will not load
without digital or RTTY definition. What about a PSK31 contest?
That means i cant use my new notebook with WT in RTTY AFSK. It has no LPT or
(real) COM Ports.
MTTY alone can do the job even without extra PTT-Line and with a very simple
interface consisting of two audiotransformers only.

73

Lup, DJ7SW
mailto:dj7sw at yahoo.com


--- On Wed, 9/17/08, Werner Maier <werner at maiers.de> wrote:

> From: Werner Maier <werner at maiers.de>
> Subject: Re: [WT-support] W-T and AFSK
> To: support at win-test.com
> Date: Wednesday, September 17, 2008, 9:44 PM
> Hello Lup,
>
> > Is there a way to use afsk-tx mode with MMTTY and
> win-test? Every time
> > when i change the band with ALT-F1/F2, my FT1000MP
> switches to RTTY-LSB.
> > My FT2000 does the same. I want to stay the radio in
> LSB.
>
> I don't know, but I guess it should be possible when
> you edit the
> bandmaps. AFAIK WT reads the frequency and searches the
> bandmap which
> mode to use.
>
> If you tweak this so that there is no RTTY it should stay
> in LSB.
> (but still this might be a problem on 14mc and up).
>
> 73 de Werner DL4NER.
> --
> Dipl.-Ing. Univ. Werner Maier
> http://www.maiers.de/
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support