[WT-support] MK2R stopped switching

K5RC tom at k5rc.cc
Wed Oct 15 03:30:00 CEST 2008


Problem solved by comparing router settings. MK2R was not selected in the
SO2R setup. Just updated all WT and MicroHam software and firmware. Wonder
what problems I induced.

 

Tom Taormina, K5RC

Virginia City NV

  _____  

From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Bob Wilson, N6TV
Sent: Tuesday, October 14, 2008 5:12 PM
To: support at win-test.com
Subject: Re: [WT-support] MK2R stopped switching

 

Tom,

 

I need much more information to diagnose this, including screen shots of the
Win-Test configuration and relevant microHAM configuration windows.  Is the
green check box visible or is it a yellow X?

 

Press Ctrl-Alt-Shift-PrintScreen to copy any highlighted screen to the
Windows clipboard, then paste the images into Paint and save as a PNG
(portable network graphics) file.

 

I assume you've already tried cold boot of the PC, then power up the MK2R,
in that order.

 

Are you using an LPT line between PC and MK2R to do the A/B radio switching
or are you using microHAM control protocol?  Does the WinKey work?

 

I guess it's possible your MK2R is busted.  The only way to tell is to swap
the two of them and see if the problem moves from one station to the other,
leaving everything else as it is.

 

73,

Bob, N6TV

2008/10/14 K5RC <tom at k5rc.cc>

Yes

 

Tom Taormina, K5RC

Virginia City NV

  _____  

From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of Bob Wilson, N6TV
Sent: Monday, October 13, 2008 7:06 PM
To: support at win-test.com
Subject: Re: [WT-support] MK2R stopped switching

 

Are bot the TX and RX "Auto" lights on?  If not, the MK2R will ignore all
software commands.

 

73,

Bob, N6TV

2008/10/13 K5RC <tom at k5rc.cc>

One of my two MK2R's has stopped switching between the two radios.
Configuration on both stations is identical both in the server and in the WT
port setup. The log shows that they keyboard switches between raidio 1 and
radio 2, but the box stays on radio 1 no matter.

 

Ideas?

 

Tom Taormina, K5RC

Virginia City NV

Home of W7RN and K7RC

http://k5rc.cc   FOC 1760

"Communication is the problem to the answer" - 10cc

 


_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support

 


_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20081014/b689b006/attachment-0001.htm 


More information about the Support mailing list