[WT-support] FT1000D working

[Bob Wilson, N6TV]

2008/10/6 Robert Pack, NX5M <nx5m at txcyber.com>

>  Finally figured out the problem why the FT1000D would not track.
> RTS and DTR in the config have to be set to HANDSHAKE.
> Default settings would not work.
> This is probably the case on the two 990's that I have as well and I will
> check into that first chance I get.
>

Well done Bob, but I don't really understand why this would make a
difference.  The DTR (DE-9 pin 4) and RTS (DE-9 pin 7) lines are not
connected to the 6 PIN CAT connector, are they?  Are they shorted together?