[WT-support] FT1000D not tracking

[Robert Pack, NX5M]

I just got a bunch of new computers and this is my first shot at getting the first one set up.
FT1000D set to default settings.
DTR/RTS both set to default always off.
I will have to look into that memory tune issue.
This is a REAL serial port and no microham controller.

This thing seems to poll a lot faster than it did with NA/CT.  Even changing the settings from auto to the others seems to have no effect.  This is not an issue as far as I am concerned but just thought I'd mention it.
I will look into the m-tune and get back to you.
Thanks for the hint.

Bob

  ----- Original Message ----- 
  From: Bob Wilson, N6TV 
  To: support at win-test.com 
  Sent: Wednesday, October 01, 2008 8:51 PM
  Subject: Re: [WT-support] FT1000D not tracking


  Did you press the "FT1000D Default Settings Button"?  

  SETUP [Enter], [Configure ...], [FT1000 default settings].

  DTR and RTS should then be set to the default:  "Always off".

  The "memory tune" feature of the radio must also be off.

  Are you using a real serial port or a USB to serial adapter?  Are you using a microHAM controller?

  73,
  Bob, N6TV


  2008/10/1 Robert Pack, NX5M <nx5m at txcyber.com>

    Can click on spots...radio goes.
    Can click on vfo a or b....radio swaps.
    Can enter freq and radio goes.
    Will not track as I dial.
    What did I miss?


    73,
    Bob NX5M




------------------------------------------------------------------------------


  _______________________________________________
  Support mailing list
  Support at win-test.com
  http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20081001/395a9b28/attachment-0001.htm