[WT-support] Import M/S log

[Bob Wilson, N6TV]

Try changing the Cabrillo file, then import again:
CATEGORY-OPERATOR: MULTI-OP
CATEGORY-TRANSMITTER: TWO

Or type REOPEN [Enter] and change the category there, then reload the log.

73,
Bob, N6TV

On Sun, Nov 23, 2008 at 3:29 PM, I4UFH HRS <i4ufh at hamradiosolutions.com>wrote:

> I had tried to import the cabrillo file generated from WT 3.23 of our last
> log, where the multiplier
> station QSO was marked with a "M" and run station QSO with and "R". After
> the import the Mults QSO are marked "R2" and Run QSO still "R" . WT is
> setted in as MultiOp in the Tecnique setting, and i suppose that the 0/1
> flag in the cabrillo file should recognized as "M" if M/S or "R2" if M2,
> but
> this is not true ... Is real annoing changing manually all the wrong
> assigned QSO.
>
> Any idea or hint ??
>
> 73 de Fabio I4UFH
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20081123/ca70eaf7/attachment.htm