[WT-support] WT HELP?

[Filipe Lopes]

Hi everyone

I am setting up W-T with WX0B Box for SO2R

I came across with the following:

When I push Shift or Caps-lock to activate the 2nd rig I dont get any 
reaction from the box

Any Ideia why the 2nd rig isnt switching?

73's Filipe Lopes
CT1ILT aka CS2T




----- Original Message ----- 
From: "Parsons, Edward S (Ed)" <esparsons at alcatel-lucent.com>
To: <support at win-test.com>
Sent: Friday, March 28, 2008 9:52 PM
Subject: Re: [WT-support] WT and SuperCombo Keyer


>I also have the ZS4TX Super Keyer II.  It works fine with WT, via the
> LPT port, with one exception; when selecting radio 2 via WT, the TX
> properly moves to Radio 2 but then spontaneously drops back to Radio 1
> after 20-60 seconds. WT thinks that it is still on Radio 2 but for some
> reason the signal on LPT pin 14 must give out after a short while.
> 
> Makes the system useless for SO2R.
> 
> Any ideas are welcome.
> 
> 73, Ed K1TR
> 
>>-----Original Message-----
>>From: support-bounces at win-test.com 
>>[mailto:support-bounces at win-test.com] On Behalf Of Juha Rantanen
>>Sent: Friday, March 28, 2008 9:15 AM
>>To: support at win-test.com
>>Subject: Re: [WT-support] WT and SuperCombo Keyer
>>
>>Rich,
>>
>>Does the three way switch Radio1 - PC - Radio2 work the 
>>correct way? If you flip it to Radio2 will the Radio2 key?
>>
>>Juha OH6XX
>>
>>Richard DiDonna NN3W wrote:
>>> Thanks for the info on Pin 14.  It was indeed checked, so it 
>>should have been functional, but it still is not keying correctly.  
>>> 
>>> Very annoyed.
>>> 
>>> 73 Rich NN3W
>>> ----- Original Message -----
>>> From: "Richard DiDonna NN3W" <nn3w at cox.net>
>>> To: <support at win-test.com>
>>> Sent: Thursday, March 27, 2008 8:32 AM
>>> Subject: [WT-support] WT and SuperCombo Keyer
>>> 
>>> 
>>>> Anyone had experience using WT using the Super Combo Keyer 
>>II?  All the documentation seems to refer to SO2R boxes that 
>>use USB ports.
>>>>
>>>> My Wintest sees both radios, takes band data from both 
>>radios, but I can only seem to be able to transmit through 
>>radio 1.  No matter what I do.  When "running" Radio 1, Radio 
>>1 transmits, and I hear the audio through Radio 2 like I should.
>>>>
>>>> But if I try to run Radio 2, the computer keys Radio 1 instead.
>>>>
>>>> Any thoughts?
>>>>
>>>> 73 Rich NN3W
>>>> _______________________________________________
>>>> Support mailing list
>>>> Support at win-test.com
>>>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>>>
>>> _______________________________________________
>>> Support mailing list
>>> Support at win-test.com
>>> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>> 
>>> 
>>
>>_______________________________________________
>>Support mailing list
>>Support at win-test.com
>>http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>