[WT-support] CAT settings of FT-1000MP MarkV (field) in Win-Test 3.20

[Andy Novikov]

Dear Friends,

Just prior the FD IARU Region 1 cw, tried to install WT in our
network.
Both Radios in the Network are FT-1000-MP-MarkV (one of them is
version - Field).

Both USB-Com interfaces are RigExpert Tiny for FT-1000 (
http://www.rigexpert.com/index?s=tiny )

The PCs (WinXP Pro SP2) recognized COM 5 (CAT) and COM 6 (CW/PPT) as a
ports with RE Tiny drivers. The CW / PTT from WT worked WELL via COM 6!

But, the CAT was not sucessul (on both PCs / TXs)! :(

The way of my config was the following:
1) Options - Configure Interfaces...
2) COM 5 - Radio 1
3) Tranceivers - Radio 1 = FT-1000MP, Don't pool = empty, Pooling rate
= Auto
4) COM 5 - Radio 1 - Configure - click FT-1000MP Default Settings - Ok
(the COM 5 port in the PC had the SAME settings 4800-8-n-2)
5) Interfaces configuration - Ok
6) Alt-J, changed manually the freq on the Main VFO, but the freq in Radio
1
Status bar is 18089 and does not change. :(

Closed all, and in the other HAN SW (AAtest Contest Module), with the
same port settings - the CAT works properly.

All the time the WT was run the first (in order to occupy the port).

Any suggestions, what I've done in the wrong way?

Will be very thankful for your suggestions.

Regards,

Andy - RZ3EM
-----------------
RK3EXA/p team IARU Region 1 FD 2008 CW

###########################################

This message has been scanned by F-Secure Anti-Virus for Microsoft
Exchange.
For more information, connect to http://www.f-secure.com/