[WT-support] statistics period in IOTA

[Braco OE1EMS]

hi tonno,

you will need to connect USB ground  with MKII ground with about 0.01µF 
capacitor at least 500V or more.
Even grounding with single piece of wire helps !

If you never use Microham keyer before, you will need to read the manual to 
setup everything corectly!
:)

Abt statistic in WT i had same problem in one of past contest,
but i cann´t remember anymore how did i fix this (maybe not at all)!


congrats on the nr of the QSO´s in IOTA!
what abt score?

73 and cu in EUHFC
de OE1EMS/E77DX


p.s.
my EZ MASTER still not working (since WPX SSB 2008)
It´s look like that Fabio dont care any more about EZ Master customers!
Maybe somebody else can help!
When i turn EZ Master on upper row in the display is black
and LED´s PWR, USB, RIG A. PLAY are on.
also led DATA is blinking for few second.
and EZ Master doesnt work at all!

tnx in advance!



----- Original Message ----- 
From: "Tõnno Vähk" <Tonno.Vahk at gildbankers.com>
To: <support at win-test.com>
Sent: Monday, July 28, 2008 5:43 PM
Subject: [WT-support] statistics period in IOTA


> Hi, we ran ca 3350 Qs in IOTA and WT worked very well as always. First 
> time ever I used Micro Keyer II-s instead of EZMs and had many problems. 
> It is very sensitive to RF and we never managed to get the MIC audio 
> right, it was distorted even by not so close antennas and we had to route 
> the Mic directly using MK only for CW. We had good grounding and a lot of 
> ferrites but that did not help. It seemed as most of the RF came in 
> through USB from computer but even heavy load of ferrites on USB cable and 
> removing all wires from computer did not fully help. Also had many 
> problems with Winkey in CW. I have used WT generated CW with EZMs and have 
> had no problems. Now with WK speed changes were frequent and some other 
> smaller issues. Is this normal with WK or how to avoid speed jumps? Also, 
> how to use WT generated CW with MK, I tried to configure it but no 
> success. Can someone point out the correct configuration? I used different 
> virtual ports for Control, CAT, PTT and WinKey. Is that the right way to 
> go?
>
> $NEXTSERIAL worked very well with WT - thanks again for that!
>
> But the only strange problem I have with WT is that the statistics is 
> shown only for period 12-24z and the other half of the contest is 
> missing... Any idea what I am doing wrong??
>
> 73
> tonno
> es5tv
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>