[WT-support] QSX and Packet - QSX does not display

[Bob Wilson, N6TV]

Here's the link <http://docs.win-test.com/wiki/Menu:Options#Bandplans...> I
was trying to point to (trailing periods in URLs often confuse email
programs).

73,
Bob, N6TV

On Nov 19, 2007 5:09 PM, Bob Wilson, N6TV <n6tv at arrl.net> wrote:

> Do you have any band plans defined to filter spots?  Select Options,
> Bandplans
>
> http://docs.win-test.com/wiki/Menu:Options#Bandplans...
>
> Temporarily uncheck "Use this bandplan for the current log" at the bottom
> to see if that makes any difference.  If it does, make sure you've selected
> the right band plan for the log, then re-enable it.
>
> Perhaps QSX spots are ignored for all but 40 and 80 SSB?
>
> I see that in WT 3.17 they changed something that may or may not be
> related:
>
> Bugfix: When entering a QSX freq for a spot, WT was picking up the same
> > transmit freq and re-listed that as the QSX instead of picking the second
> > VFO freq.
> >
>
> So perhaps you could try it with WT 3.16 to see if it works OK in that
> version?  Note:  avoid mixing different versions WT on the same network.
>
> 73,
> Bob, N6TV
>
>
> On Nov 19, 2007 4:41 PM, Tim Duffy K3LR <k3lr at k3lr.com> wrote:
>
> >  While setting up WinTest for CQWW CW we noticed that the DX Cluster box
> > (where packet is displayed) and DX Cluster Announcements (where spots are
> > stacked for S&P) are not showing anything that contains QSX in the comment
> > field that was sent to the WinTest logging computers.
> >
> >
> >
> >  As a result we are not seeing any spots that have "split" or QSX in
> > them.
> >
> >
> >
> > Are we doing something in error? Ideas?
> >
> >
> >
> > Thanks and 73,
> >
> > Tim K3LR
> >
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20071119/af4a7b7f/attachment.htm