[WT-support] QSX and Packet - QSX does not display

[Bob Wilson, N6TV]

Do you have any band plans defined to filter spots?  Select Options,
Bandplans

http://docs.win-test.com/wiki/Menu:Options#Bandplans...

Temporarily uncheck "Use this bandplan for the current log" at the bottom to
see if that makes any difference.  If it does, make sure you've selected the
right band plan for the log, then re-enable it.

Perhaps QSX spots are ignored for all but 40 and 80 SSB?

I see that in WT 3.17 they changed something that may or may not be related:

Bugfix: When entering a QSX freq for a spot, WT was picking up the same
> transmit freq and re-listed that as the QSX instead of picking the second
> VFO freq.
>

So perhaps you could try it with WT 3.16 to see if it works OK in that
version?  Note:  avoid mixing different versions WT on the same network.

73,
Bob, N6TV

On Nov 19, 2007 4:41 PM, Tim Duffy K3LR <k3lr at k3lr.com> wrote:

>  While setting up WinTest for CQWW CW we noticed that the DX Cluster box
> (where packet is displayed) and DX Cluster Announcements (where spots are
> stacked for S&P) are not showing anything that contains QSX in the comment
> field that was sent to the WinTest logging computers.
>
>
>
>  As a result we are not seeing any spots that have "split" or QSX in them.
>
>
>
> Are we doing something in error? Ideas?
>
>
>
> Thanks and 73,
>
> Tim K3LR
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20071119/67b6024d/attachment.htm