[WT-support] WAEDC RTTY observations

[Rudolf Schwenger]

Tolles Ergebnis! Herzlichen Glückwunsch!!

vy 73 de Rudolf, DJ3WE


----- Original Message ----- 
From: "Bernhard Buettner DL6RAI" <wintest07 at dl6rai.muc.de>
To: "Win-Test Support List" <support at win-test.com>
Sent: Tuesday, November 13, 2007 12:35 AM
Subject: [WT-support] WAEDC RTTY observations


> Dear WT Team,
>
> we used Win-Test during past weekend very sucessfully and scored 1329
> QSOs, 1184 QTCs and 819 Mults with a final score of about 2 million.
> Win-Test worked great in combination with the MMTTY engine and
> microHAM USB II interfaces.
>
> The implementation of the QTC send and receive function is marvellous
> and worked very well for us.
>
> We had two stations side by side and switched between Run and Mult
> status several times.
>
> Two minor issues:
>
> 1) QTC group numbering started with 1 on each station. So when after
> a while the Run station became the Mult station and vice versa,
> the new station would generate QTC 1/10, 2/10, 3/10 etc. The rules
> say, the numbers have to be consecutive, so there needs to be some
> intelligence to sync the QTC group numbers.
>
> 2) The NP3D/W1 was identified as a K3 multiplier by Win-Test. In fact
> it should be a K1.
>
> I did not observe a packet stream delay like the weekend before in
> MMC on 2 meters although we used the same version.
>
> 73 Ben, DL6RAI
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>