[WT-support] UDP Network error #2 GPRS conf.

[Gerald Bischof]

Hello Zygi!

It's about the same here!

If I run wtDxTelnet alone without WT all Spots are received by the other 
machines!
If I start WT on same machine with wtDxTelnet, get the same Error_Messages!

Testing all the settings with gateway, routing static route and so.
Disabled all Firewalls and Antivirus SW.

Will testing next time at the moment its too busy!

73, Gerald
OE2GEN, OE2S, ....

----- Original Message ----- 
From: "Zygi SP5ELA" <zygi at sp5pbe.waw.pl>
To: <support at win-test.com>
Sent: Tuesday, May 29, 2007 5:12 PM
Subject: [WT-support] UDP Network error #2 GPRS conf.


> Subject: UDP Network error #2 GPRS conf.
>
>
> Hi WT Users!
> I experienced same problem like Gerald, OE2GEN (see below) with 
> WT/WtDxTelnet
> trying to use it outside the city over GPRS connection.
> It seems be strange: services such as e-mail, browser, ftp working well.
>
> But no spots over wtDxTelnet with strange message:
> Ethernet: ERROR sending UDP protocol #10065, no connection.
>
> Any standard manipulation with mask and broadcast do nothing.
> GPRS is defined with static 2 DNS servers and dynamic IP.
> ..........................
> the day after...............
> Default gateway searching alghorithm in wtDxTelnet in this case is 
> probably wrong.
> Quite different default broadcast address between Wt and wtDxTelnet,
> eg, wtDxTelnet broadcast defaul:  10.242.152.117
>       WT broadcast default:            10.255.255.255
> on the sane GPRS connection:
> ------------------------------------------------------------------------------------
> Route print:
>                0.0.0.0          0.0.0.0             10.242.152.117 
> 10.242.152.117       1
>    10.242.152.117  255.255.255.255        127.0.0.1       127.0.0.1 
> 1
>    10.255.255.255  255.255.255.255   10.242.152.117  10.242.152.117 
> 1
>         127.0.0.0        255.0.0.0                   127.0.0.1 
> 127.0.0.1                1
>         224.0.0.0        224.0.0.0            10.242.152.117 
> 10.242.152.117       1
> default gateway:   10.242.152.117.
> ------------------------------------------------------------------------------------
>
> Correct Broadcast configuartion is:
> wtDxTenet:                 10.255.255.255
> WT:                            10.255.255.255
>
> or
> 127.255.255.255
> 127.255.255.255
>
> Try it... Gerald
>
> 73, Zygi SP5ELA
>
> --------------------------------------------------------------------------------------------------
> Subject: [WT-support] UDP Network error
>
> Hello!
> Scenario!
> Network with 5 machines are runnig well, all inputs are right on all other 
> machines!
> If I connect via Telnet the cluster I receive the following error 
> messages!
>>
>> Start first Telnet  ==> "error opening UDP socket # 10013"
>>
>> Start first WT ==> "Ethernet: error sending UDP protocol # 10065"
>>
>> NOW!
>> All machines are connected via CAT5. RJ45, Telnet and so on is running 
>> all Cluster Messages received on all machines!
>> If one machine is connected via WLAN to the Internet, receive this 
>> messages, or connected via HighSpeed UMTS by
>> Phonecard (HSDPA)!
>> No ohther process is running on PORT 9871!
>> If I changed the Port-Number to other one eq. 9872 and so on, allways the 
>> same error-message!
>> Only one process have the port-number, if I start WT first it's WT or 
>> Telnet is first, than Telnet!
>> On Network with CAT5. RJ45, both Processes has the same port-number, like 
>> 9871!
>>
>> ... all machines are on the same Network, same Port-number and so on!
>> Network is running well!!
>>
>> Any idea please!!
>> Thanks, looking forward
>>
>> Gerald, OE2GEN, OE2S
>>
>>
>> PS: Hope see you in the WPX-CW this weekend
>>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>