[WT-support] UDP Newtwork error

EA4TX - Pablo ea4tx at ea4tx.com
Fri May 25 00:14:22 CEST 2007


Hi Gerald,

I suppose you have not added the default gateway route for accesing to
Internet. The error (Socket) #10065 is due because there is not a route to
Host (remote cluster).
In other words, is you have a router for internet access, you must add the
router address as the default gateway; if you have not a router, and only
one computer has the internet access (w/o router) you must open the
wtDXTelnet at this computer.

In any way, I have not clear the setup of your LAN (IP's) and where is your
internet access. On which computer are you running wtDxTelnet? Could you
explain in detail the IP's you have on your 5 computer, with the mask used
and the default gateway address on each computer?

Regards, Pablo - EA4TX






-----Original Message-----
From: support-bounces at win-test.com [mailto:support-bounces at win-test.com]On
Behalf Of Gerald - 5B4ABP
Sent: Thursday, May 24, 2007 4:58 PM
To: Support at win-test.com
Subject: [WT-support] UDP Newtwork error


Hello!

Scenario!

Network with 5 machines are runnig well, all inputs are right on all other
machines!

If I connect via Telnet the cluster I receive the following error messages!

Start first Telent  ==> "error opening UDP socket # 10013"

Start first WT ==> "Ethernet: error sending UDP protocol # 10065"

NOW!

All machines are connected via CAT5. RJ45, Telnet and so on is running all
Cluster Messages received on all machines!

If one machine is connected via WLAN to the Internet, receive this messages,
or connected via HighSpeed UMTS by Phonecard (HSDPA)!

No ohther process is running on PORT 9871!

If I changed the Port-Number to other one eq. 9872 and so on, allways the
same error-message!

Only one process have the port-number, if I start WT first it's WT or Telnet
is first, than Telnet!

On Network with CAT5. RJ45, both Processes has the same port-number, like
9871!

... all machines are on the same Network, same Port-number and so on!
Network is running well!!

Any idea please!!

Thanks, looking forward

Gerald, OE2GEN, OE2S


PS: Hope see you in the WPX-CW this weekend









Ich verwende die kostenlose Version von SPAMfighter,
die bei mir bis jetzt 1402 Spammails entfernt hat.
Für private Anwender ist SPAMfighter völlig kostenlos!
Jetzt gratis testen: hier klicken.



More information about the Support mailing list