[WT-support] UDP Newtwork error

[Gerald - 5B4ABP]

Hello!

Scenario!

Network with 5 machines are runnig well, all inputs are right on all other machines!

If I connect via Telnet the cluster I receive the following error messages!

Start first Telent  ==> "error opening UDP socket # 10013"

Start first WT ==> "Ethernet: error sending UDP protocol # 10065"

NOW!

All machines are connected via CAT5. RJ45, Telnet and so on is running all Cluster Messages received on all machines!

If one machine is connected via WLAN to the Internet, receive this messages, or connected via HighSpeed UMTS by Phonecard (HSDPA)!

No ohther process is running on PORT 9871!

If I changed the Port-Number to other one eq. 9872 and so on, allways the same error-message!

Only one process have the port-number, if I start WT first it's WT or Telnet is first, than Telnet!

On Network with CAT5. RJ45, both Processes has the same port-number, like 9871!

... all machines are on the same Network, same Port-number and so on! 
Network is running well!!

Any idea please!!

Thanks, looking forward

Gerald, OE2GEN, OE2S


PS: Hope see you in the WPX-CW this weekend





 

-- 
Ich verwende die kostenlose Version von SPAMfighter für private Anwender,
die bei mir bis jetzt 1402 Spammails entfernt hat.
Bezahlende Anwender haben diesen Hinweis nicht in ihren E-Mails.
Laden Sie SPAMfighter kostenlos herunter: http://www.spamfighter.com/lde
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20070524/d7b7e4cf/attachment.htm