[WT-support] WT under W2K

[Paul Cassel]

> -----Original Message-----
> From: support-bounces at win-test.com 
> [mailto:support-bounces at win-test.com] On Behalf Of Laurent 
> HAAS - F6FVY
> Sent: Monday, March 26, 2007 1:46 PM
> To: support at win-test.com; Nick Lekic
> Subject: Re: [WT-support] WT under W2K
> 
> 
> Hi Nick
> 
> Nick Lekic a écrit :
> 
> >  >1/ Before the computer restarted (1st paragraph), was the 
> "Sticky  
> > >setting" enabled or not ?
> > 
> > Paul has already provided answer to this one.  The "Sticky setting" 
> > was
> > not originally
> > enabled.   After the problem was observed, however, 
> enabling "Sticky 
> > Setting" would
> > not enforce the R1/R2 designator after restarting Win-Test.
> >  In other words - it had no effect at this point.
> 
> The sticky setting is only useful when you start a new log on a given 
> operating position. It then takes this setting as default for the 
> entered QSOs, unless you change it.
> 
> > If I understand your question correctly,  the offending radio 
> > continued to operate on the same band it was on before, after the 
> > radio designator got changed.
> > 
> > Before the problem:
> > R1 was logging on 20m
> > R2 was logging on 40m
> > 
> > Win-Test then got restarted.  Radio bearing R2 designator is now 
> > renamed R1: R1 remains on 20m R1 (originally R2) remains on 40m
> 
> I re-checked the code and, for now, the only way I find to get this 
> behaviour is to restart Win-Test and modify the station 
> _NAME_ (in the 
> contest setup dialog). Please confirm you didn't do that ;-)  
> This makes 
> sense as WT browses back the log to find what was the status of this 
> station when the last QSO was entered on it (= with this name).
>

Which field that is displayed to the user is the _NAME_?

If these are the fields to identify the user - no - nothing would have been
changed

Paul


 
> 73
> 
> Larry - F6FVY
> 
> _______________________________________________
> Support mailing list
> Support at win-test.com 
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>