[WT-support] WPX M/2 STN identifier

[Paul Cassel]

> NB: the serial numbers are by band in Win-Test, not by station. This is 
> also compliant with the rules.

I do not read this anywhere in the rules for scoring and is driving us nuts
as no one else is changing count with band changes



> -----Original Message-----
> From: support-bounces at win-test.com [mailto:support-bounces at win-test.com]
> On Behalf Of Olivier F5MZN
> Sent: Friday, March 23, 2007 7:38 PM
> To: support at win-test.com
> Subject: Re: [WT-support] WPX M/2 STN identifier
> 
> Paul Cassel wrote:
> > I must have WT for the WPX M/2 set-up incorrect as I am not seeing any
> > station identifier.  Each stn is assigned an individual serial number
> > however the Cabrillo file shows a 0 at the end of the field and the on
> > screen both stns show R1.
> 
> Check that Category is correct (Multiop, Two Transmitter).
> 
> Then select in menu "Commands | Station Type" either RUN1 or RUN2. You
> can also use the text commands "RUN1" or "RUN2" (to be typed in the
> callsign field).
> 
> Then the "St" colomn will show R1 for the first station, and R2 for the
> second one.
> 
> I just checked all of this with ver 3.10 and as far as I can see here,
> everything's just like described above.
> 
> > Radio 1 is set as RUN 1 and radio 2 is set as RUN 2 in the initial log
> > set-up.
> 
> What do you mean by "initial log set-up"? There is no way to define
> which station is RUN1 or RUN2 in the "Contest Configuration" Window.
> 
> NB: the serial numbers are by band in Win-Test, not by station. This is
> also compliant with the rules.
> 
> 73,
> --
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support