[WT-support] Re: M/S rule clarification request

[pat_f6irf]

Steve's email closes the topic - sorry for the QRM !
Pat

smerchan at sonic.net a écrit :

>Hello Patrick and Laurent - yes, I am guilty of getting too many questions
>about multi categories.  :-)  Xmtr number not required for M/S.
>
>73, Steve
>
>  
>
>>Hi again Steve,
>>I copied your reply to the Win-Test  reflector, and here is the answer I
>>got from Laurent f6fvy (WT developpers team)
>>
>>/ />/ 012 0 /I'm pretty surprised by this "new" notion of xmtr number in
>>_M/S_ category, I never heard of, for any contest !
>> >TBH, I really wonder if Steve didn't made a mistake and wasn't rather
>>talking abt the _M/2_ category in which the xmtr number
>> >is much more usual (and supported in WT).
>> >Before going any further, could you please make me a favour and ask
>>for a confirmation, please ? 73 Laurent
>>
>>So I a'm coming back to to you, just to make sure that the indication of
>>Xmter-nr also applies to the M/S category ...
>>(I put Laurent on CC)
>>
>>Regards - Patrick
>>
>>PS: Obviously the problem is that WT puts a 0 in the last Cabrillo
>>column, whatever station has been used.
>>
>>
>>
>>
>>smerchan at sonic.net a écrit :
>>
>>    
>>
>>>Hi, Patrick - yes, serial number by band is ok.  Please keep track of
>>>xmtr
>>>number also.  Thanks and good luck in the contest.
>>>
>>>73, Steve K6AW
>>>
>>>
>>>
>>>      
>>>
>>>>Hi
>>>>I am Patrick F6IRF and we are preparing M/S from Morroco with callsign
>>>>CN5W
>>>>
>>>>I read carefully the rules and it specifies
>>>>
>>>>*(a) Single-Transmitter* (MULTI-ONE): Only one transmitter and one band
>>>>permitted during the same time period (defined as 10 minutes).
>>>>*Exception: One other band may be used during any 10-minute period if
>>>>the station worked is a new multiplier. Use separate serial numbers for
>>>>the multiplier station. Logs found in violation of the 10-minute rule
>>>>will be automatically reclassified as multi-multi. Maximum power allowed
>>>>is 1500 watts total output. Your log MUST show the correct serial number
>>>>sent and received for each contact.*
>>>>
>>>>the important point is "*Use separate serial numbers for the multiplier
>>>>station."
>>>>
>>>>I tried both N1MM and Wintest software, and both are giving a serial
>>>>number by band (as per multi-multi rule) not by station as specified in
>>>>the rules.
>>>>Do I misunderstand the rule ? Will S/N "by band" be accepted for a M/S
>>>>entrant?
>>>>
>>>>Thanks in advance
>>>>Patrick
>>>>F6IRF/CN2WW
>>>>
>>>>*
>>>>
>>>>
>>>>
>>>>
>>>>        
>>>>
>>>
>>>
>>>
>>>
>>>      
>>>
>>
>>    
>>
>
>
>
>
>  
>