[WT-support] WAE CW: QTCs/SO2R issue

[Matt IZ3EYZ]

Hi Bob,

yup, ufb and clear explanation (tnx), question nr.2 solved! :-)

Let's solve nr.1 now ;-)

Anyone (developers or users) with hints about this:

> 1) Actually the RX QTC window (alt-L) is call sensitive just if the 
> callsign
> is typed into main radio window. This is what happens:
>
> RADIO A 20mt 14.025
> RADIO B 40mt 7.007
>
> Now if I ask/get qtcs from a station on the 1st radio callsign goes right
> into QTC window and the related QRG is ok on the cabrillo output file.
>
> If I want to get some QTCs from 2nd radio (let's suppose dual cqing or
> S&Ping scenario-happens most of the time in WAE) I type in the callsign 
> into
> secondary radio window. WT in this case is NOT sensitive to what happens
> into the 2nd radio window. Yes, I know I can manually change the callsign
> into QTC window but the next problem is that when you generate the 
> cabrillo
> file all received QTCs on the 2nd radio are printed on the 1st radio QRG
> (according to the above example 2nd radio on 40mt, all QTCs will be shown 
> as
> RXed on 20mt).
>
> This is what I ask for: is it possible to have WT sensitive according to 
> the
> RADIO FOCUS in order to get the 2nd radio QTCs logged into the right 
> band??
>
> The only option actually is to keep track on paper about the right band 
> and
> type in the right QRG after the contest :-)
>
> You can't even watch to the 2nd radio qso to understand the band the 2nd
> radio QTCs were taken cos it often happens you may recall later a DUPE
> station on the 2nd radio to get qtcs. That way you simply log QTCs or
> additional ones without logging the dupe qso which is not needed. That
> happens vy often in WAE.

Gl in WAE you too.


73

Matt.EYZ



----- Original Message ----- 
From: "Bob I.2.WIJ" <i2wij at yahoo.com>
To: "Support Win-Test" <support at win-test.com>
Sent: Wednesday, July 25, 2007 9:42 AM
Subject: [WT-support] WAE CW: QTCs/SO2R issue


> Hi Matt,
>
>>2) Just a minor issue. Is there a way to redifine
>> messages into Alt-L (QTC
>>window)?? Is there a way to assign a short cut key
>> to "Validate" (lack of it
>>actually) into Alt-L window??
>
> I will answer to your point 2 questions.
>
> Take a look at WT.INI file.
> There is a [QTC] section, and should look like this:
> [QTC]
> CwRx QTC=QTC?
> CwRx QRV=QRV
> CwRx TIME=TIME?
> CwRx CL=CL?
> CwRx NR=NR?
> CwRx AGN=AGN
> CwRx QSL gr/nr=QSL $GRNR
> CwTx QSL ALL=I2WIJ
> CwRx CR=R
> CwRx TU=TU
> QRV=QRV?
> CwTx TU=TU
>
> In fact this is already modified by me,
> at the QSL ALL line.
> The lines correspond to Fx keys like this:
> F1=CwRx QTC=QTC?
> F2=CwRx QRV=QRV
> F4=CwRx TIME=TIME?
> F5=CwRx CL=CL?
> F6=CwRx NR=NR?
> F7=CwRx AGN=AGN
> F9=CwRx QSL gr/nr=QSL $GRNR
> F10=CwTx QSL ALL=I2WIJ
> CR=CwRx CR=R
> +=CwRx TU=TU
> QRV=QRV?
> CwTx TU=TU
> The last two raws should be for sending qtc by DX
> so don't care.
>
> You can modify the keys as you want.
> I modified F10 to send my call, when asking for QTCs
> to some station already worked.
> They usually say NO (hi) but most of the time
> they ask CL?, so I send mine with F10.
>
> You can "Validate" without sending anything
> by changing the line corresponding to the + key
> like this:
>
> CwRx TU=
>
> That will validate and send nothing!
> Hope it is clear enough.
>
> Warning: save a copy of WT.INI file before modifiing.
> Make mods when WT in not running.
>
> GL in WAE.
>
> Ciao
> Bob, I2WIJ
>
>
>
>
> ____________________________________________________________________________________Ready 
> for the edge of your seat?
> Check out tonight's top picks on Yahoo! TV.
> http://tv.yahoo.com/
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>
> __________ NOD32 2417 (20070724) Information __________
>
> This message was checked by NOD32 antivirus system.
> http://www.eset.com
>
>