[WT-support] WT + Microham +WinKey

[G3SJJ]

D'accord. Merci bien. Chris G3SJJ


Olivier F5MZN wrote:
> G3SJJ wrote:
>> Olivier, thanks for looking at this. Here is what I have just done :
>
> Thank you for that Chris,
>
> Here is my comments. Note that I am using the devel version which I 
> have already done some correction on.
>
>> - Expand mH Router, select Win-Test Preset
>> - Speed range set at 15-40, speed indicated is 27wpm with pot set at 
>> 12 o'clock position
>> - Minimise Router
>> - Open WT at AFS log
>> - Bottom line of rate window says CW 28/39wpm.
>> - F1 message sent at the lower speed, so must be 28wpm
>
> I cannot repeat. But I confirm that before sending anything, the 
> paddle speed is wrong (very slow).
>
>> - Paddle sending at same speed !!
>> - Send a couple of CQs then send on paddle whose speed is NOW the 
>> HIGHER one
>> - Rate window still indicates 28/39
>> - Press ALT F10, left number now says 30 and F key speed has increased.
>> - Paddle speed now at same speed, so it has reduced from 39 to 30
>
> Indeed.
>
>> - Turn speed control knob back until indicated speed is 30, knob now 
>> at 10 o'clock position
>> - Press Alt F10 to increase F key speed to 39 and paddle speed also 
>> went to same speed but indicated 31
>
> Cfm.
>
>> - Pressed F1, and no message sent !!!!
>
> I cannot repeat. But I have fixed something about so it can explain 
> why it is OK with my version.
>
> I'll do my best to fix this. The default speed range 20-60 will remain 
> as is in the coming version but it is added on my todo list for the 
> next one.
>
> 73,