[WT-support] NAQP logging bug

[k8bb at comcast.net]

Hi Laurent,

Thanks! Wow, you guys are fast!

#1: There are times when I worked DX stations, even in NA contest, (F5IN,
PY2NT, etc.). I assume I can still log as DX (or F, PY, etc.)?

#2. I just tried it again. If both radios are in VFO A, no problems.
However, if a radio is on VFO B, and I use * to change radios, the radio
switches to VFO A, thereby losing the frequency I was using. It is as if WT
is wanting only to use VFO A. ???

Thanks again for you very fast response!

73!

----- Original Message ----- 
From: "Laurent HAAS - F6FVY" <f6fvy at free.fr>
To: <support at win-test.com>
Sent: Sunday, January 14, 2007 16:18
Subject: Re: [WT-support] NAQP logging bug


> Hi Don
>
> k8bb at comcast.net a écrit :
>
> > I operated NAQP yesterday, SO2R. I experienced two things that I think
are
> > bugs:
> >
> > #1: In the QSO entry field, if I type in CALL, then skip NAME and enter
QTH,
> > then go back to type in NAME, the QTH field goes blank.
>
> Fixed in my current dvpt version.
>
> > If I <enter> without
> > fixing, no QTH is logged at all. I have to go up one QSO and edit it
with
> > the correct QTH.
>
> I just modified the code to ensure the SPC field is filled to enter the
> Q (assuming you worked a NA station).
>
> Both modifications should be included in the next release.
>
> > #2: Using * for switching R1/R2, in stereo mode, while running on either
> > radio, sometimes the frequency would magically change. Does the radio
have
> > to be in VFO-A? It happened to me twice. I tried a few times to
replicate
> > it, but I could not quite get the exact same thing to happen when I
wanted
> > it to.
>
> Noted. No radio here to reproduce it :-(  Maybe Olivier can help further.
>
> Tnx for the report.
>
> 73
>
> Larry - F6FVY
>
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support