[WT-support] More problems with interfaces

[Albert Crespo]

Juan,
You do not have have a USB problem.
 The problem is with your interface. My one K1NU interface cable controls
both the radio and CW. Win-test  for my MKV reads 4800 8-N-2 CW and that the
options for Pin 4 and & indicate CW.
73, Albert

  _____  

From: support-bounces at win-test.com [mailto:support-bounces at win-test.com] On
Behalf Of EA5BM Juan Luis
Sent: Friday, January 12, 2007 22:19
To: support at win-test.com
Subject: [WT-support] More problems with interfaces


Hi again boys !! 
 
More problems with usb interfaces:  :-(((((
 
  My first problem about how to transmit through usb port has been solved
building a serial port cw interface and  as per WT website info and you help
aslo configuring the WT properly in menu. So I can transmit CW OK.
 
My laptop (a Fujitsu - Siemens Amilo XA-1526) has not any other ports than
usb, so to control my Icom radio via CAT I purchased another usb to com
adapter and also runs OK, the radio is controlled without incidents.
 
The problem appears if all two adapters are conected at the same time, so
that the CAT system runs allways well but the CW interface sends only a
continue tone when any message is requested, F1, F2, calls, etc. if CAT is
conected.
 
If the CAT is disconected, inmediatly the CW is OK.................
¿¿@##@@@?????
 
The problem concerning the monitoring CW still remains unsolved.
 
Thanks in advance
 
Juan Luis, EA5BM
 
 
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20070113/b2c1f69d/attachment.html