[WT-support] Request on PTT

[Hugo pa4la]

Extra info:
It only occured with the Elecraft K2 because the K2 uses the same input for
ptt and cw. 

Hugo
PA4LA



-----Oorspronkelijk bericht-----
Van: support-bounces at win-test.com [mailto:support-bounces at win-test.com]
Namens Peter
Verzonden: zaterdag 17 februari 2007 11:47
Aan: support at win-test.com
Onderwerp: [WT-support] Request on PTT

HI

Last weekend we run Win-test in a Multi/Multi mixed mode contest with 
great pleasure.
We use the internal soundcard as voicekeyer and the cw keyer.
But after the contest, we got one thing that we wish to add.

On ssb we route the mic via the soundcard back to the Heil 
mic/footswitch connector
PTT was done via the lpt/or rs232 port to the same Heil/footswitch connector
This was working good

In CW the  we run via the same port, but have to remove the PTT line by 
hand. Otherwise we have a constant key down signal.

Is it possible to add at the config inteface window a button  "set no 
PTT in CW"

Peter
PC2A


_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support