[WT-support] RTTY using parallel port and EXTFSK

[Patrick 9A5CW]

Hello, use extfsk and try with this shematic!
http://mmhamsoft.amateur-radio.ca/extfsk.htm USB2LPT dont works with it!

73 and have fun on tty :)


On 2/10/07, Olivier F5MZN <olecam at f5mzn.org> wrote:
>
> Johannes Wilke wrote:
> > Hi all,
> > I have configured WT using a parallel port for CW (PIN 17) and PTT
> > (PIN16), Strobe (PIN1) is connected to the emitter of the 2N2222
> > transistors. This works without any problems.
> > Now I want to get QRV in RTTY-contests in FSK using also the parallel
> > port with MMTTY and EXTFSK. Is it possible to use the same interface
> > like in CW-mode with PIN17 now for FSK-input on the TRX and PIN 16 for
> > PTT or is it necessary to make a new connection from PIN1 to PTT and
> > PIN2 to FSK-input of the TRX (sample proposed by the author of EXTFSK)?
> > Is it possible to assign in MMTTY and WT, on which PIN of the parallel
> > port the output for FSK and PTT should be?
>
> All the interfaces control is done by the MMTTY engine. As far as I
> know, it is not possible to output the PTT/FSK events on the LPT port.
>
> 73,
> --
> Olivier / f5mzn
> _______________________________________________
> Support mailing list
> Support at win-test.com
> http://www.f5mzn.org/cgi-bin/mailman/listinfo/support
>



-- 
9A5CW - Patrik Hrvatin
--... ...--
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://www.f5mzn.org/pipermail/support/attachments/20070211/ac90d3f2/attachment.html