[WT-support] Icom SPLIT problem

PO box640 at sympatico.ca
Wed Feb 7 05:23:15 CET 2007


HI 

Yes I have ICOM 756PROIII and the minus sign short cut or split mode send's
the radio in LSB ...as reported ...
Version 3.8 0 patch beta 1


73' Phil VE2FU 

-----Message d'origine-----
De : support-bounces at win-test.com [mailto:support-bounces at win-test.com] De
la part de Olivier F5MZN
Envoyé : February 6, 2007 11:11 AM
À : WT
Objet : [WT-support] Icom SPLIT problem

Hi -

I have been reported that split mode is still not correctly set by WT 
onto Icom radios with double VFO.

Although I have no reason not to trust that report I wonder if it is 
specific to a specific setting or if all of the Icom owners can repeat 
the same problem. Because one of the biggest contest event is close to 
today I don't want to introduce any bug in, and your reports will be 
very appreciated!

Here is the scenario (as far as I understood):

- Mode is CW (don't know if SSB is affected)
- A callsign is entered manually in the bandmap, with the Icom radio in 
split mode
- Both VFO's are changed to a different frequency on the radio, and 
split is disabled (not manually, but through WT)
- Double-clicking on the callsign previously entered in the bandmap 
moves the VFOs and activate split mode on the radio, *but* the frequency 
that was put into the B-VFO should have been put into the A-VFO and 
vice-versa.

I don't know if entering split mode using the minus (-) key is also 
affected.

Thanks in anticipation to all double VFO Icom owners for your reports!

73,
-- 
Olivier / f5mzn
_______________________________________________
Support mailing list
Support at win-test.com
http://www.f5mzn.org/cgi-bin/mailman/listinfo/support



More information about the Support mailing list